Products
Digital Readouts System
Pearl V3 Series Digital Readout
- interactive message display
- Metric/Inch conversion
- Radius/diameter conversion
- Preset, Dimension define
- Absolute counting, Machine reference
- Homming facility
- Non volatile memory backup
- Power saving mode
- Calculator
- Encoder direction setect
- 0-9 Keyboard
- Halving function
- Center of circle
- Near zero warning beep
- Lincar encoders supported LE 2534, LE 1820, LE 3043, ME 2910, ME 2920, ME6012 Read hoads/scales
- 2/3/4 Axes configuration
- Any axis can be configured as linearrangular axıs
- High counting frequency up to 3.75 Mhz
- Multi datums-total 6 datums
- Settabe display refresh time
- Up to 1000 points of circle/arc/straight Ine/inclined line/Frames/matrix hole pattern
- Mirroring/scaling
- Linear error compensation
- Nonlinear error compensation of 200 points each axs
- Angular error compensation of 200 points also possible
- Angular pod of 1000 points
- Selectable display resolution: 0.1/0.01/0.05/0 005/ 0.001/0.0005/ 0.0001mm
- Selectable encoder resolution 0.1/ 0.01/ 0.05/ 0.005/ 0.001/ 0.0005/ 0,0001 mm/user defined
- Measuring range-99999.999 to 99999.999 mm
- Constant surface speed output (optional)
- Taper calculation, Taper Tuning, Toal offset-no of tools-20
- Job cock/food rate display
- Programming block (2000 points)
- Direct loading of axf file using the software
- Axes summing/vectoring
- Polar coordinates
- Z+Q, Skew
- Serial RS232 interace
- Programmable so relay output-pulse/ lovel type (optional)
Pearl V4 Series of DRO's
- DRO’s can be fitted on any conventional machines either new or old such as
- No of Axis: 1 Axis, 2 Axis, 3 Axis
- Interactive message display +Metric / Inch conversion
- Radius/diameter conversion
- Preset
- Zero Datum +Dimension define
- Absolute counting +Machine reference
- Homming facility
- Bolt hole calculation (PCD drilling) up to 100 points
- Non volatile memory backup +Power saving mode
- Tool length offset compensation of 10 tools
- Programming memory block of 100 steps
- Calculator
- Encoder direction select
- Selectable display resolution 0.1/0.01 / 0.05 / 0.0005 / 0.001/0.0005/0.0001 mm/users defined
- 0-9 keyboard
- Halving function +Center of circle 99 points
- Near zero warning beep
- Linear encoders supported LE 2534, LE 1820, +LE 3043, ME 2910, ME 2920, ME 6012
- Scales and read heads
- Datums upto 99
PMD Series of DRO's
- No of Axis 1 Axis, 2 Axis, 3 Axis (Rotary)
- Metric/Inch conversion
- INC/ABS
- Linear error compensation
- Absolute counting, Machine reference
- Absolute incremental counting
- Linear error compensation
- Non volatile memory backup
- Power saving mode
- Encoder direction select
- Display resolution 0.001mm 0.005mm.0.010mm 0.1mm
- Selectable encoder resolution 0.001mm, 0.005mm, 0.010mm 0.1mm
- Center of circle & radius measurement
- Linear encoders supported LE 2534 LE 1820, LE 3043. ME 2910, ME, ME 6012 Read heads & Scales
- Lincar encoders supported LE 2534, LE 1820, LE 3043, ME 2910, ME 2920, ME6012 Read hoads/scales
- Small size
- DFG/DMS for rotary axis
- 3rd Axis rotary in 3 axis model
- 1 Axis rutury model avallable (PMDRX)
XTREME+ Series of DRO's
- Color graphical lcd display 5.7′ diagonal size.
- User friendly GUL
- 3/4 Axis configuration
- Linear error compensation
- Sleek design
- Absolute incremental counting
- Accurate and time saving measurement algorithms
- Built in 2D CMM features-check the job on same machine after work is over
- High accuracy optical scale measuring system
- Audio feedback
- Part tolerance
- RS232 data output
- Online 2D drawing plotting on LCD display
- 11 Scale 20 drawing export to PC in dif format. Touch probe interface.
- IR remote keyboard, Footswitch input
- programmable XY coordinates/mirroring/scaling
- 10000 Drilling points storage memory for run mode Linear error correction,
- Non Inear error correction (nlcf)
- Language independent.
- Optional serial printer interface
- Extended features using OPTOOLS V3 software for excel reporting, dif export det import and excel create or import for drilling points downlunding in ran mode user language downloading, NCLF upload/download etc